Regeneration of bone defects caused by trauma, infection, tumours or inherent genetic
disorders is a clinical challenge that usually necessitates bone grafting materials. Autologous …

From a literature survey, it was evident that a wide variety of kinematic conditions occur at
the femoral—tibial bearing surfaces, including various degrees of rolling and sliding. A test …

Injuries of bone and cartilage constitute important health issues costing the National Health
Service billions of pounds annually, in the UK only. Moreover, these damages can become …

The plastic components of 280 retrieved unicondylar and total knee arthroplasties were
studied. Wear was visually scored using a relative ranked data method. Although wear on the …

Conventional amputation prosthetics are problematic because they rely on the stump–socket
interface for attachment. Intraosseous transcutaneous amputation prostheses (ITAP) could …

A knee simulating machine is required for the design and evaluation of total knee replacements,
the kinematics and the long-term wear being aspects of particular importance. There are …

Widespread concern exists about adverse tissue reactions after metal‐on‐metal (MoM) total
hip replacement (THR). Concerns have also been expressed with wear and corrosion of …

It has been speculated that material loss, either as corrosion or wear, at the head–stem
taper junction is implicated in the high revision rates reported for metal‐on‐metal total hip …

Objective To report clinical application of intraosseous transcutaneous amputation prosthesis
( ITAP ) for limb salvage. Study Design Retrospective case series. Sample Population …

An increasing volume of work supports utilising the mechanobiology of bone for bone
ingrowth into a porous scaffold. However, typically during in vivo testing of implants, the …